Hyperion gaming tower will make you fall in love with its design

If you are still looking for a good gaming case for your computer from Nfortec we bring you an in-depth review of our Hyperion gamer tower, available in black or white and stands out for its design, ample space to place all your components and a ventilation that will withstand the most demanding temperatures. Want to know more about Hyperion and fall in love at first sight?

A gaming tower for gamers

The Hyperion gaming case is available in two colors: black or white. It is made of 0.6 mm steel, tempered glass and plastic. The dimensions of this ARGB midtower are 47.5 x 21 x 50.5 centimeters with a total weight of 5.5 kilograms

The front of the Hyperion tower has a design similar to that of a space tower and has ARGB built in. At the top it has a lid with several holes that give it a differentiated touch. On its front panel we have:

• Two USB 2.0,
• One USB 3.0,
• Headphone jack
• Microphone input
• Power button
• Reset button
• Button to control the LEDS

The important thing is the inside of the tower

It is compatible with ATX, Micro ATX, ITX and E-ATX motherboards. Inside this tower we can put a CPU cooler up to 17 cm high and a graphics card up to 40 cm long. Hyperion has two bays for 2.5-inch disks and two bays for 3.5-inch disks. In the PCi slots section we will have 7 slots, which have a single-use cap. It is necessary to pay attention to where each component goes, because once the cover is removed, we will not be able to put it back

Both the power supply and hard drives are covered by a black metal on which we will have the logo of Nfortec. It also includes a cover to better hide the cables and the tower is better presented even in the part that is not seen

Ventilation will be Hyperion's best ally

On the front of this gamer case we can put either three 120 millimeter fans or two 140 millimeter fans. In case we want to install liquid cooling, we can place up to 240/280 millimeters at the top at most. The back of the tower can be fitted with a single 120 mm fan, which is included with the tower itself, or a 120 mm radiator

We recommend placing two more 120 mm Oberon fans in the front and a 240 mm liquid cooler at the top, such as the Nfortec Hydrus V2 (in red or blue)

Other details to note

The illumination of the front of the Hyperion tower and the rear fan can be controlled from the motherboard itself or from the LED button included on the top of the case. Assembly is simple and intuitive and tidying up the cables is very easy and there is plenty of space

The highlights of the Hyperion tower are its design, ventilation, the space it has for components and the possibility of choosing between black and white

We must take into account that if our motherboard does not have a 5 volt ARGB connector we will not be able to synchronize the lighting with our motherboard