Be amazed by the PC case Nfortec Antares

Space, design and RGB customization in line with the latest trends in the hardware market. If you are looking for a PC case that will surprise you, you are probably looking for the Nfortec Antares. Designed by and for gamers to offer maximum performance based on the components you install in your computer. If you are looking for compatibility, Antares will fit in any set-up and can be assembled with almost any motherboard on the market. Are you ready to discover our Antares PC case?

A design you will fall in love with

The chassis of the PC case Nfortec Antares is available in white and black. The tower features an eye-catching front with fully configurable RGB technology, which will go in line with the LED strip located at the bottom of the right side and the 120mm RGB rear fan installed. The front design abandons the flat look to provide an ABS surface divided by an LED strip that adopts a hexagonal design

The LED line starts with a strip flush with the surface to form a hexagon with depth, extending the LED strip through two bifurcations to protrude above the front recess. In this way the design plays with the slit to mix customizable RGB lighting, perspective and depth to play with the geometry of the strip and break the traditional flat design

Button and component layout

The tower integrates LED button to switch between lighting modes, as well as remote control to select between seven fixed colors and different types of dynamic lighting. On the upper front we will have at hand two USB 3.0 ports, as microphone and high definition audio, LED button, reset button and on/off button. To encourage organic breathing of the components, the top of the front ends in a ventilation grille that plays with trapezoids to highlight design and functionality

Another detail to take into account in the maintenance of our computer is the cleaning of dust. For this reason the upper part integrates a magnetized grid that adheres and removes easily to clean the accumulated dust. In addition to a tray with removable grid at the bottom of the tower. The right side will display the components in all their glory. The tempered glass panel makes the entire installation visible and allows you to see the rear RGB fan installed, in addition to the two 120mm fans installed on the front

Simple, intuitive installation and compatibility

Elegance and visibility for a breakthrough design that will fit in any set-up or desktop. With a thickness of 0.90 mm that provides extra strength, robustness and security. In turn we will find a compartment on the left side panel designed for proper cable management, being able to introduce the cooling cables in the power supply through the hole comfortably

With regard to the installation of components, the interior has ample space that stands out for its versatility and compatibility with the needs of a demanding user. The Antares PC case is compatible with ATX, Micro-ATX and ITX motherboards. It introduces the 3-pin connector to communicate the tower controller with the motherboard lighting. Therefore, if you have a motherboard compatible with this technology, you can synchronize the lighting of the tower and the motherboard thanks to the 3-pin connector. The space allows to install graphics cards up to 350 mm, processors up to 180 mm, two 2.5" SSD hard disks and two 3.5" HDD hard disks

Antares: guaranteed cooling of all components

Compatible cooling, in addition to the three included fans, allows the installation of two 140 or 120 mm fans and a 240 mm radiator on top. As well as an additional 120 or 140 mm fan or a 240, 280 or 360 mm radiator on the front. At the rear you can complement the RGB fan with a 140 mm radiator. In addition, the seven expansion slots allow you to accommodate the graphics card to your liking, being able to remove and reposition them easily