Krater RGB White
    Krater RGB White
    Krater RGB White
    Krater RGB White
    Krater RGB White
    Krater RGB White
    Krater RGB White
    Krater RGB White

    Krater RGB White

    5 Reviews

    Krater ARGB Gaming Tower White

    Performance and aesthetics come together in the new chassis Nfortec Krater ARGB, creating a tower that highlights its ventilation system with its mesh front and in turn a spectacular design that catches you from the first moment.

    *Units purchased from July 2020 carry fans and controller upgraded to 5v 3pin A-RGB connector, so it can generate incompatibility in components that currently carry the previous 6-pin proprietary connector Nfortec.

    Color

    NF-CS-KRATER-WHITE
    €99.95
    Tax included

     
    Cooling at ARGB pace
    Our new tower Nfortec Krater has four ARGB fans, three on the front and the last one on the rear. This composition, together with the LED strip that we find at the top of the front allow us to create truly spectacular effects thanks to its 20 different lighting modes selectable through the remote control included. Following our line, Krater is compatible with the latest RGB technologies of GIGABYTE, Asus and MSI motherboards.
    Outstanding ventilation
    Thanks to its four powerful 120mm fans and its mesh front panel, Nfortec Krater will provide you with optimal temperature levels to get the most out of your components. In addition, its full cover lower fairing completely isolates the heat expelled by the power supply, thus avoiding further heat transfer.
    Air flow
    The three front fans of Nfortec Krater drive a large flow of cold air inside keeping at bay the high temperatures reached by the equipment and enhancing its functionality. Counting also, on the other side, with our rear fan that will expel all the hot air generated by our gaming tower.
    Perfect for any configuration

    Nfortec Krater presents a chassis made of steel that will provide the security you are looking for your components. Its structure makes it compatible with ATX, M-ATX, ITX and E-ATX motherboards allowing multiple combinations for your compositions. In addition, thanks to its upper and lower magnetized dust filters you will get a much more comfortable maintenance of the case.

    Wide range of possibilities

    Thanks to its design, we will be able to enjoy a large number of mounting options on Nfortec Krater. Inside we can place graphics cards up to 320mm or Cooler with maximum height of 160mm. Its lower fairing has capacity for power supplies with 205mm and its front is prepared to support radiators up to 360mm. All this in a tower with dimensions of 400x208x458mm.

    A front end to match

    From its upper area you can control all aspects of Krater. Apart from the two 3.5mm HD jacks for audio and microphone, you will also find the Power button plus the Reset button that will be accompanied by the LED button to control all the ARGB effects you can enjoy. Thanks to its USB ports, two 2.0 and an extra 3.0 you will have all the comforts for your peripherals.

    * Units purchased after July 2020 have fans and controllers upgraded to the 5v 3pin A-RGB connector, which may cause incompatibility with components that currently use the previous proprietary 6-pin A-RGB connector Nfortec.

    MODELKRATER WHITE
    DIMENSIONS (L x W x H)400mm x 208mm x 458mm
    WEIGHT5,5Kg
    MATERIAL0.6 mm SPCC steel, tempered glass
    FAN LOCATIONSFront: 3 x 120mm (3 x RGB included)
    2x 140mm
    Rear: 1x 120mm (1x RGB included)
    Top: 3x 120mm
    2x 140mm
    DISK BAYS2x 2.5" + 2x 3.5"/2.5" + 2x 3.5"/2.5"
    EXPANSION SLOTSx7
    FRONT I/OUSB 3.0 x2
    USB 2.0 x2
    Headset/Microphone x1
    On/Off
    Restart
    LED button
    DUST FILTERS1x Superior
    1x Front
    1x Lower
    MOTHERBOARD TYPEATX, MicroATX, ITX
    POWER SUPPLYATX format up to 205mm (not included) placed at the bottom
    GRAPHICS CARD (GPU)Up to 320mm (not included)
    CPU DISSIPATORUp to 160mm (not included)
    Title Aliexpress
    Krater RGB White
    Supported motherboard size
    ATX
    ITX
    MicroATX
    Maximum length Graphics card
    320mm
    Maximum height Air cooling
    160mm
    Expansion slots
    7
    RGB controller included
    Yes
    Fans included
    4
    Synchronization to motherboard 3pin 5v
    Yes
    Front Liquid Cooling
    120mm
    240mm
    Rear Liquid Cooling
    120mm
    Nfortec
    MODELKRATER
    DIMENSIONS (L x W x H)400mm x 208mm x 458mm
    WEIGHT5,5Kg
    MATERIAL0.6mm SPCC steel, tempered glass
    FAN LOCATIONFront: 3x 120mm (3x RGB included)
    2x 140mm
    Rear: 1x 120mm (1x RGB included)
    Top: 3x 120mm
    2x 140mm
    DISK BAYS2x 2,5" + 2x 3,5"/2,5"
    EXPANSION SLOTSx7
    FRONT I/OUSB 3.0 x2
    USB 2.0 x2
    Headphone/Microphone x1
    Power On/Off
    Reset
    LED Button
    DUST FILTERS1x Top
    1x Front
    1x Bottom
    MOTHERBOARD TYPEATX, MicroATX, ITX
    POWER SUPPLYATX format up to 205mm (not included) placed at the bottom
    GRAPHICS CARD (GPU)Up to 320mm (not included)
    CPU DISSIPATORUp to 160mm (not included)
    DOWNLOAD MANUAL
    5 Reviews
    Buenísima torre
    Sigue siendo la mejor torre gaming de Nfortec, al menos mi favorita.
    on
    Mejor torre
    El mejor modelo de torre de Nfortec, es un must have
    on
    Mejor torre
    La mejor torre que hay en el mercado a mi gusto, estética super guapa, blanca con 4 ventiladores y leds en ellos perfecta para alguien que le encanten las torres algo llamativas
    on
    Merece la pena
    Pues es la primera vez que me gasto 80 euros en una caja !! Y tengo que decir que merece la pena. La calidad de los acabados, diseño, funcional... y lo mas importante, y por lo que he comprado esta caja, la refrigeracion... los 3 ventiladores rgb de 120 mm delanteros, meten aire como si fuera tarifa !! encima tiene una rejilla anti polvo de iman... y luego la posibilidad de poner otros dos ventiladores en la parte de arriba hasta de 140 mm. La caja es super espaciosa y tiene un diseño para meter cables perfecta, lo unico que no me convence mucho es que solo admite dos unidades de 3.5 ya se que poco a poco se estan quedando atras por discos 
    on
    Completa
    Una caja muy completa, formato ATX pero tamaño muy reducido, 2 bahías de 3,5" (escondidas donde la fuente de alimentación) y 2 bahías de 2,5" (una detrás de la placa y otra a la derecha de ésta). 4 ventiladores ARGB incluidos, con su controlador el cual tiene capacidad para otros 4 ventiladores ARGB. Todo muy bien pensado, tornillos más que suficientes para poner cualquier elemento, se nota calidad en los encajes de todos los elementos
    on
    ARGB cooling

    Our new tower Nfortec Krater has four ARGB fans, three on the front and the last one on the back. This composition, together with the LED strip that we find at the top of the front allow us to create really spectacular effects thanks to its 20 different lighting modes selectable through the remote control included. Following our line, Krater is compatible with the latest RGB technologies of GIGABYTE, Asus and MSI motherboards.

    Outstanding ventilation

    Thanks to its four powerful 120mm fans and its mesh front panel, Nfortec Krater will provide you with optimal temperature levels to get the most out of your components. In addition, its full cover lower fairing completely isolates the heat expelled by the power supply thus avoiding further heat transfer

    Airflow

    The three front fans of Nfortec Krater drive a large flow of cold air into the interior keeping at bay the high temperatures reached by the equipment and enhancing its functionality. Counting also, on the other side, with our rear fan that will expel all the hot air generated by our gaming tower.

    Perfect for any configuration

    Nfortec Krater presents a chassis made of steel that will provide the security you are looking for your components. Its structure makes it compatible with ATX, M-ATX, ITX and E-ATX motherboards allowing multiple combinations for your compositions. In addition, thanks to its upper and lower magnetized dust filters, you will get a much more comfortable maintenance of the case

    Wide range of possibilities

    Thanks to its design, we can enjoy a lot of mounting options in Nfortec Krater. Inside we can place graphics cards up to 320mm or Cooler with maximum height of 160mm. Its lower fairing has capacity for power supplies with 205mm and its front is prepared to support radiators up to 360mm. All this in a tower with dimensions of 400x208x458mm.

    A front end to match

    From its upper area you can control all aspects of Krater. Apart from the two 3.5mm HD jacks for audio and microphone, you will also find the Power button plus the Reset button, which will be accompanied by the LED button to control all the ARGB effects you can enjoy. Thanks to its USB ports, two 2.0 and an extra 3.0 you will have all the comforts for your peripherals

    * Units purchased after July 2020 will have their fans and controllers upgraded to the 5v 3pin A-RGB connector, which may cause incompatibility with components that currently use Nfortec's previous proprietary 6-pin connector.

    Product added to wishlist
    Product added to compare.