Nfortec Nervia Black
    Nfortec Nervia Black
    Nfortec Nervia Black
    Nfortec Nervia Black
    Nfortec Nervia Black

    Nfortec Nervia Black

    Nervia Gaming Tower

    Nervia enters the Nfortec catalog through the front door. With a 3D geometric front design, lighting touches to give it that gaming detail, and innovative component installation options. It has three pre-installed fans with PWM function that you can manage to optimize the airflow, its rear bay, with PCI slots, is rotatable, for a vertical installation of the graphics card, and is fully compatible with full ARGB installations. Nervia is much more than an ATX gaming tower.

    Color

    €79.95
    Tax included

    100% secure payments
     
    3D geometric design

    Nervia enters the catalog of Nfortec through the front door. With a 3D geometric front design, lighting touches to give it that gaming detail, and innovative component installation options. It has three pre-installed fans, its rear bay, with PCI slots, is rotatable, for a vertical installation of the graphics card, and is fully compatible with full ARGB installations. Nervia is much more than an ATX gaming tower.

    ATX tower loaded with features

    The first thing that will attract you to Nervia, will undoubtedly be its front design, but Nervia is not only an elegant gaming tower, its features will make you fall in love with it. Its front design is meshed to ensure good airflow, making the most of its 3 included fans with PWM function along with the additional cooling you install on it. Nervia is compatible with ATX, MicroATX, ITX and even the large Extended-ATX motherboards, so you can configure your PC the way you really want.

    Cooling to your liking

    The Nervia gaming tower comes equipped with three pre-installed fans, two front and one rear, all with PWM function designed to give maximum performance and allowing you to calibrate the power curves to optimize airflow at any time, leaving in the background the lighting, but is fully compatible with additional cooling and ventilation ARGB. You can install CPU liquid coolers up to 360mm at the front and up to 280mm at the top, or up to six fans in total. Combine the options as best suits your configuration, and maintain an optimal temperature for your components

    Epic installation options

    This gaming tower is designed so that you can install and configure your components easily and cleanly, thanks to its cable management bridge, and enjoy them through its tempered glass side panel. One of its key features is that the rear bay, where the PCI slots are located, is rotatable, so you can install, if desired, the graphics card vertically and you can make the most of the interior of Nervia.

    Details that stand out

    Nervia is the perfect gaming tower for those looking for a more discreet PC case in terms of lighting, but with all the details that make it perfect for infinite configurations, including the possibility of upgrading to full ARGB. It has the necessary connections for your usual peripherals, 2 USB 2.0 ports and one 3.0, plus microphone and headphone connection, and the LED button to control the lighting details of its front.

    MODELNERVIA
    DIMENSIONS (L x W x H)430mm x 210mm x 465mm
    WEIGHT6,6Kg
    MATERIAL0.6mm SPCC steel, tempered glass
    FAN LOCATIONS
    Front: 3x 120mm (2x included)
    Rear: 1x 120mm (1x included)
    Top: 2x 120mm
    2x 140mm
    LIQUID COOLING
    Front: Radiator up to 360mm
    Upper: Radiator up to 280mm
    Rear: Radiator up to 120mm
    DISK BAYS2x 2.5" + 2x 3.5"/2.5" + 2x 3.5"/2.5"
    EXPANSION SLOTSx7 Rotatable to vertical
    FRONT I/O
    USB 2.0 x2
    USB 3.0 x1
    Headset/Microphone x1
    On/Off
    Reset/LED
    LED
    DUST FILTERS
    1x Superior
    1x Lower
    MOTHERBOARD TYPEATX, MicroATX, ITX, Extended-ATX
    POWER SUPPLYATX format up to 180mm (not included) placed in the bottom part
    GRAPHICS CARD (GPU)Up to 360mm (not included)
    CPU DISSIPATORUp to 170mm (not included)
    CABLE MANAGEMENT24mm
    FAN SPECIFICATIONS
    Dimensions120mm x 120mm x 25mm
    PWMYes
    Maximum speed (RPM)800 - 1500 RPM ± 10%
    Air flow rate (airflow)59.31 CFM, Min:51.40CFM
    Static pressure1.33mm H2O ± 10%
    Noise generated28.63 dB(A)±10%
    Bearing typeHydraulic Bearings
    Estimated useful life40.000 h @ 25Cº
    Voltage12V 0.18A ±10% 12V 0.18A ±10% 12V 0.18A ±10
    Connectors12v 4pin (PWM) Male + Female
    Title Aliexpress
    Nfortec Nervia - Gaming Computer Case Compatible ATX, Mini-ATX and ITX Boards, 3 PWM Fans Included, RGB Mesh Front, Dust Filters, Tempered Glass Side Panel, USB 3.0, Black
    Supported motherboard size
    ATX
    ITX
    MicroATX
    Maximum length Graphics card
    360mm
    Maximum height Air cooling
    170mm
    Expansion slots
    7
    RGB controller included
    No
    Fans included
    3
    Synchronization to motherboard 3pin 5v
    Yes
    Front Liquid Cooling
    120mm
    240mm
    360mm
    Rear Liquid Cooling
    120mm
    Superior Liquid Cooling
    120mm
    240mm
    Nfortec
    NF-CS-NERVIA-B
    No reviews
    3D Geometric Design

    Nervia enters the Nfortec catalog with a bang. With a 3D geometric front design, lighting touches to give it that gaming detail, and innovative component installation options. It has three pre-installed fans, its rear bay, with PCI slots, is rotatable, for a vertical installation of the graphics card, and is fully compatible with full ARGB installations. Nervia is much more than an ATX gaming tower

    ATX tower loaded with features

    The first thing that will attract you to Nervia, will undoubtedly be its front design, but Nervia is not only an elegant gaming tower, its features will make you fall in love with it. Its front design is meshed to ensure a good airflow, making the most of its 3 included fans with PWM function along with the additional cooling you install on it. Nervia is compatible with ATX, MicroATX, ITX and even the large Extended-ATX motherboards, so you can configure your PC the way you really want

    Cooling to your liking

    The Nervia gaming tower comes equipped with three pre-installed fans, two front and one rear, all with PWM function designed to give maximum performance and allowing you to calibrate the power curves to optimize airflow at any time, leaving in the background the lighting, but is fully compatible with additional cooling and ventilation ARGB. You can install CPU liquid coolers up to 360mm at the front and up to 280mm at the top, or up to a total of six fans. Combine the options as best suits your configuration, and maintain an optimal temperature for your components

    Epic installation options

    This gaming tower is designed so that you can install and configure your components easily and cleanly, thanks to its cable management bridge, and enjoy them through its tempered glass side panel. One of its key features is that the rear bay, where the PCI slots are located, is rotatable, so you can install, if desired, the graphics card vertically and you can make the most of the interior of Nervia

    Details that stand out

    Nervia is the perfect gaming tower for those looking for a more discreet PC case in terms of lighting, but with all the details that make it perfect for infinite configurations, including the possibility of upgrading to full ARGB. It has the necessary connections for your usual peripherals, 2 USB 2.0 ports and one 3.0, plus connection for microphone and headphones, and the LED button to control the lighting details of its front

    Product added to wishlist
    Product added to compare.