Nfortec DYS Black Gaming Tower
    Nfortec DYS Black Gaming Tower
    Nfortec DYS Black Gaming Tower
    Nfortec DYS Black Gaming Tower
    Nfortec DYS Black Gaming Tower
    Nfortec DYS Black Gaming Tower

    Nfortec DYS Black Gaming Tower

    Gaming Tower

    The new gamer tower Nfortec Dys comes ready to conquer your set-up, with its elegant design and its mesh front, which will make your components are perfectly ventilated. With ARGB technology so you can synchronize other components, and control the lighting from the front. Choose Dys in black or white color, and give it that avant-garde touch that your set-up is asking for

    Color

    NF-CS-DYS-B
    €59.95
    Tax included

     
    Fully functional design

    Our new Dys gaming tower is made of high quality materials, and its chassis, made of steel, will protect your components over time. Its front mesh with 3D design not only makes it an elegant tower, but also influences its good ventilation. It has two anti-dust filters, one lower and one upper, the latter being magnetic, facilitating the cleaning and maintenance of your tower. It could not miss its hinged tempered glass side, so that your components shine inside, and any modification task is easy. Choose between the Dys models in white or black, and show off your set-up.

    Maximum compatibility with ARGB technology

    Dys is compatible with ARGB technology, and has a 5v 3-pin connector, to synchronize its lighting with other ARGB components, through your motherboard or controller. It has three fans with ARGB lighting, two on the front and one on the back, already installed as standard. Control the lighting in a simple and convenient way, from the button available on the front panel, and choose from the 15 available modes the one that best suits your set-up.

    Spacious and with everything close at hand

    The dimensions of our Dys tower, 340mm x 205mm x 412mm, make it large enough to install your favorite components, and at the same time, be perfect in any space. It is compatible with MicroATX and ITX boards, so that you have the maximum power in the minimum space. Inside you can place graphics cards up to 340mm or Cooler with maximum height of 160mm. Its lower independent bay has capacity for power supplies up to 180mm and has 4 expansion slots. On the front you will find the connections for your main peripherals, as well as the lighting control button and the power button. Enjoy sound through speakers or headphones, thanks to the 3.5mm HD jack, and conveniently connect your peripherals to its two USB 2.0 ports, and its USB 3.0 port.

    Prepared for high ventilation

    In addition to the 3 fans that already comes as standard, Dys allows to place more cooling components. It accepts a total of 6 fans, being possible to place 3 120 mm on the front or two 140 mm; on the top it has space for 2 120 mm or two 140 mm, and finally, one 120 mm on its rear. The included fans, two front and one rear, will create a great airflow to keep your components cooled, expelling all the hot air they generate.

    MODELDYS BLACK
    DIMENSIONS (L x W x H)340mm x 205mm x 412mm
    WEIGHT4,9Kg
    MATERIAL0.6mm SPCC steel, tempered glass
    FAN LOCATIONS
    Front end: 3x 120mm (2x RGB included)
    2x 140mm
    Rear: 1x 120mm (1x RGB included)
    Upper part: 2x 120mm
    2x 240mm
    EXPANSION SLOTSx4
    FRONT I/O
    USB 3.0 x1
    USB 2.0 x2
    Headset/Microphone x1
    On/Off
    LED RGB Control
    DUST FILTERS
    1x Upper part (Magnetic)
    1x Lower part
    MOTHERBOARD TYPEMicroATX, ITX
    POWER SUPPLYATX format up to 180mm (not included) placed in the bottom part
    GRAPHICS CARD (GPU)Up to 330mm (not included)
    CPU DISSIPATORUp to 160mm (not included)
    Title Aliexpress
    Nfortec DYS Black Gaming Tower
    Supported motherboard size
    ITX
    MicroATX
    Maximum length Graphics card
    330mm
    Maximum height Air cooling
    160mm
    Expansion slots
    4
    RGB controller included
    No
    Fans included
    3
    Synchronization to motherboard 3pin 5v
    Yes
    Front Liquid Cooling
    120mm
    240mm
    Rear Liquid Cooling
    120mm
    Superior Liquid Cooling
    120mm
    240mm
    Nfortec
    MODELDYS
    DIMENSIONS (L x W x H)340mm x 205mm x 412mm
    WEIGHT4,9Kg
    MATERIAL0.6mm SPCC steel, tempered glass
    FAN LOCATION
    Front: 3x 120mm (2x RGB included)
    2x 140mm
    Rear: 1x 120mm (1x RGB included)
    Top side: 2x 120mm
    2x 240mm
    EXPANSION SLOTSx4
    FRONT I/O
    USB 3.0 x1
    USB 2.0 x2
    Headphone/Microphone x1
    Power On/Off
    RGB LED Control
    DUST FILTERS
    1x Top (Magnetic)
    1x Bottom
    MOTHERBOARD TYPEMicroATX, ITX
    POWER SUPPLYATX format up to 180mm (not included) placed on bottom side
    GRAPHICS CARD (GPU)Up to 330mm (not included)
    CPU DISSIPATORUp to 160mm (not included)
    No reviews
    Fully functional design

    Our new Dys gaming tower is made of high quality materials, and its chassis, made of steel, will protect your components over time. Its front mesh with 3D design not only makes it an elegant tower, but also influences its good ventilation. It has two anti-dust filters, one lower and one upper, the latter being magnetic, facilitating the cleaning and maintenance of your tower. It could not miss its hinged tempered glass side, so that your components shine inside, and any modification task is easy. Choose between the Dys models in white or black, and show off your set-up

    Maximum compatibility with ARGB technology

    Dys is compatible with ARGB technology, and has a 5v 3-pin connector, so you can synchronize its lighting with other ARGB components, through your motherboard or controller. It has three fans with ARGB lighting, two on the front and one on the back, already installed as standard. Control the lighting in a simple and convenient way, from the button available on the front panel, and choose from the 15 available modes the one that best suits your set-up

    Spacious and with everything at hand

    The dimensions of our Dys tower, 340mm x 205mm x 412mm, make it large enough to install your favorite components, and at the same time, be perfect in any space. It is compatible with MicroATX and ITX boards, so that you have the maximum power in the minimum space. Inside you can place graphics cards up to 340mm or Cooler with maximum height of 160mm. Its lower independent bay has capacity for power supplies up to 180mm and has 4 expansion slots. On the front you will find the connections for your main peripherals, as well as the lighting control button and the power button. Enjoy sound through speakers or headphones, thanks to the 3.5mm HD jack, and conveniently connect your peripherals to its two USB 2.0 ports, and its USB 3.0 port

    Prepared for great ventilation

    In addition to the 3 fans that already comes as standard, Dys allows to place more cooling components. It accepts a total of 6 fans, being possible to place 3 120mm on the front or two 140mm; on the top it has space for 2 120mm or two 140mm, and finally, one 120mm on its rear. The included fans, two front and one rear, will create a great airflow to keep your components cooled, expelling all the hot air they generate

    Product added to wishlist
    Product added to compare.