English 
Español
Italian
Português PT
Français
Deutsch
Your cart
There are no more items in your cart
€8.22
RGB supplementary fan for Draco V2 A-RGB *Only compatible with Draco v2 towers after September 2020 and upgrading the connector to 3pin 5v A-RGB.
Nfortec Nebulus High Performance ARGB Fan for PCs
Nebulus High-Performance ARGB PC Fan
The Nebulus ARGB PC fan incorporates a unique 11-blade design and anti-vibration pads to reduce noise to a minimum. Get the best airflow for your PC and synchronize your ARGB lighting with the standard 5v 3pin ARGB connector. Installation in three easy steps.
Not just another A-RGB fan
Let an A-RGB fan surprise you with top of the range performance with
Do you have AIRFLOW?
With
Installation in three easy steps
Nebulus allows for easy configuration and can be placed in any position on your gaming tower. Nebulus features a simple model that includes a single ARGB fan that you can connect to your A-RG controller or directly to the same connector on your motherboard.
The first step for installation will be to check that your motherboard or controller is compatible with the standard 5v 3pin ARGB connector. Then connect the 3pin ARGB connector to the designated ARGB port on the motherboard. And finally, complete the installation by connecting the 12v 4pin power connector to either the SYS_FAN or CPU_FAN connector on the motherboard (check your motherboard manual).
ARGB synchronization
The lighting included in our Nebulus model starts by default with the well-known Spectrum mode. To complete your equipment, you can opt for the Atria liquid cooling or the Centaurus X heatsink. If you don't have a tower yet
| Model | NEBULUS |
| Dimensions | 120mm x 120mm x 25mm |
| Maximum speed (RPM) | 700 - 1700 RPM ± 10% |
| Air flow rate (airflow) | 68 CFM ± 10% (MAX) |
| Static pressure | 1.61mm H2O ± 10% |
| Noise generated | 16.2-33dB(A)±10% |
| Bearing type | Hydraulic Bearings |
| Estimated useful life | 40.000 h @ 25Cº |
| Voltage | 12V 0.3A ±10% 12V 0.3A ±10% 12V 0.3A ±10 |
| Connectors | 5v ARGB 3pin 12v 4pin power supply (PWM) |
| Content | 1x NEBULUS 4x screws for installation |
- Title Aliexpress
- Nfortec Nebulus High Performance ARGB Fan for PCs
- Power connector
- 4pin
- Lighting Connector
- 3pin5v
- ARGB controller required
- Yes
| Model | NEBULUS |
| Dimensions | 120mm x 120mm x 25mm |
| Maximum speed (RPM) | 700 - 1700 RPM ± 10% |
| Airflow | 68 CFM ± 10% (MAX) |
| Static pressure | 1,61mm H2O ± 10% (max) |
| Noise generated | 16.2-33dB(A)±10% Noise generated |
| Bearing type | Hydraulic Bearings |
| Estimated life of use | 40.000 h @ 25Cº |
| Voltage | 12V 0.3A ±10% 12V 0.3A ±10% 12V 0.3A ±10 |
| Connectors | 5v ARGB 3pin 12v 4pin power (PWM) |
| Contents | 1x NEBULUS 4x screws for installation |
No reviews
Not just another A-RGB fan
Let an A-RGB fan surprise you with top of the line performance with Nfortec Nebulus. With a unique blade design with 11 blades, it will show you what it is capable of. Nfortec Nebulus is also capable of delivering the highest possible illumination in every situation. And with anti-vibration pads that help reduce noise, a must for any gaming set-up with multi-fan configurations. If you want performance and appreciate lighting, Nebulus is your choice.
do you have AIRFLOW?
With Nfortec Nebulus we want to give you the maximum amount of airflow for configurations that require it, allowing the rest of your components to maintain 100% performance. With a size of 120mm, 11 blades and up to 1700 rpm, you will get up to 68 CFM with a pressure of 1.61 H2O.
Installation in three easy steps
Nebulus allows for easy setup and can be placed in any position on your gaming tower. Nebulus has a simple model that includes a single ARGB fan that you can connect to your A-RG controller or directly to the same connector on your motherboard
The first step for installation is to check that your motherboard or controller is compatible with the standard 5v 3pin ARGB connector. Then connect the 3pin ARGB connector to the designated ARGB port on the motherboard. And finally, complete the installation by connecting the 12v 4pin power connector to either the SYS_FAN or CPU_FAN connector on the motherboard (check your motherboard manual)
ARGB Synchronization
The lighting included in our Nebulus model starts by default with the well-known Spectrum mode. To complete your equipment, you can opt for the Atria liquid cooling or the Centaurus X heatsink. If you still do not have a tower Nfortec the Krater model may be the component you are missing to complete your set-up and customize it by synchronizing the components Nfortec.
6 other products in the same category:
Tap to zoom
