Here it is Nfortec Antares

The new RGB gaming tower at a glance

The rGB gaming tower Nfortec Antares captures all eyes with its addressable RGB front, RGB rear fan and backlit base. Its 0.9mm steel finishes and tempered glass side give it that touch of elegance and security that we all like so much and that will make your components components look even better. Both at the top of the front and at the bottom it has grids, combined with the three included fans provide an optimal airflow for all your interior

In addition, the top and bottom dust vents will keep all the dirt away from your precious PC. We have also equipped Nfortec Antares with dimensions of 468x210x408mm that place it within the mid case tower range.

Versatile interior for Antares RGB gaming tower

The intelligent design of our new rGB gaming tower Nfortec Antares is compatible with almost all motherboard models on the market, even though it is a mid-size model. If you have chosen ATX, micro-ATX or mini-ITX you will have no problem with Antares.

Another highlight is that it incorporates the latest RGB synchronization technology with MSI, GYGABYTE and ASUS motherboards that have ports for 3-pin/5v connections. Its ability to adapt to any configuration you propose is achieved thanks to the spacious interior that is able to accommodate three fans on the front, two at the top and one at the rear that you can also configure its height. It also supports heatsinks up to 180mm and graphics cards up to 350mm.

At the bottom we see a fairing that serves to hide the power supply and hide the cables to get a clean installation, we will find here the two bays for the 3.5-inch HDD and at the top of the fairing the other two for the 2.5-inch SSD.

sll3wWx1-0_sBC9QG_wu1VwQpMLklcIeH2S-Fz-4

Control panel included in the new RGB gaming tower

At the top of the front of rGB gaming tower Nfortec Antares you will find everything you need to control any aspect of your tower tower. Starting from the standard pair of jack connectors for audio and microphone there are also two USB 3.0 ports. At the other end of the front you will find the buttons, the power and reset as the LED from which you will control the lighting of the tower tower.

Lx4VrCxQ2jHkXenidNCM-xnCm3AHzgQIUBS7t_Cb

Details to raise the level of your gaming equipment

To make a difference and give the rGB gaming tower Nfortec Antares of that extra quality we have added details to make your experience with it much more satisfying.

If you are not near your tower and you want to change its lighting you do not need to go to it, you can set any of the modes available from its RGB controller.

We are reaching a point where the graphics cards are getting bigger and therefore weigh more, this makes them move down and taking inclination, to solve this situation we have incorporated a height adjustable stand to help you hold it.

At the base of the steel legs we have placed rubber strips to reduce possible vibrations and at the same time protect the surface on which you place Antares.

On the back of the board we will find the controller for up to 8 rGB LED fans fans with two extra LED strips. From here you can choose to control the backlighting from the front or through the motherboard compatibility.

As not everyone has the same tastes, the RGB gaming tower Nfortec Antares is available in black or white

If you want to find out where you can get your hands on it just click here.

Comments (0)

Posts destacados
Product added to wishlist
Product added to compare.